您好,欢迎访问无锡(大地)方管生产厂家!

方管、圆管

厂家直销更实惠

规格全 库存多

值得您信赖

全国咨询热线

13961728888

无锡(大地)方管生产厂家
您的位置:首页 > 资讯动态 > 行业知识

联系我们

地址:无锡市钱桥溪南开发区钱胡路553号

咨询热线:

0510-83207888

13961728888

镀锌方管镀锌层分为哪几种以及弯曲强度

发布时间:2019-05-19人气:66
方管导读 :镀锌方管在新建住宅中,禁止使用冷镀锌钢管作为给水管。镀锌方管弯曲试验公称口径不大于50mm的镀锌钢管应作冷弯曲试验。弯曲角度为90°,弯曲半径为外径的8倍。

锌层是电镀层,锌层与钢管基体独立分层。锌层较薄,锌层简单附着在钢管基体上, 镀锌方管容易脱落。故其耐腐蚀性能差。镀锌方管在新建住宅中,禁止使用冷镀锌钢管作为给水管。镀锌方管弯曲试验公称口径不大于50mm的镀锌钢管应作冷弯曲试验。弯曲角度为90°,弯曲半径为外径的8倍。 Zinc layer is an electroplating layer, and zinc layer is separately stratified with the steel tube matrix. The zinc layer is thin, and the zinc layer is simply attached to the steel tube matrix. The galvanized square tube is easy to fall off. Therefore, its corrosion resistance is poor. Galvanized square pipes are prohibited to be used as water supply pipes in newly built residential buildings. Galvanized square pipe bending test The galvanized steel pipe with nominal diameter less than 50 mm should be cold bending test. The bending angle is 90 degrees and the bending radius is 8 times of the outer diameter. 

辛苦整理!转载请注明来自 http://dktsq.com/xingyedongtai/124.html

你觉得这篇文章怎么样?

0 0

推荐资讯